![who to exit qualcomm hs usb qdloader 9008 samsung who to exit qualcomm hs usb qdloader 9008 samsung](https://gsmxt.com/wp-content/uploads/2020/04/meizu-16th-white-600x600-1.jpg)
- Who to exit qualcomm hs usb qdloader 9008 samsung drivers#
- Who to exit qualcomm hs usb qdloader 9008 samsung driver#
The problem is solved by inserting a material that puts permanent pressure on these parts.Wrong forum. Probably it's CPU or some other chips that get out of proper contact (unsoldered?) with the motherboard's pcb - due to heating maybe.
![who to exit qualcomm hs usb qdloader 9008 samsung who to exit qualcomm hs usb qdloader 9008 samsung](https://www.droidwin.com/wp-content/uploads/2021/03/download-install-Qualcomm-HS-USB-QDLoader-9008-Drivers.jpg)
It appears that the problem is mechanical. The problem is solved by inserting a material that puts permanent pressure on these parts. It tkaes pressing on the motherboard a bit before putting the screws back.) Special attention is required to the connector under the motherboard on the conductors leading to the power switch - it gets easily unclamped when raising the motherboard even a little.
![who to exit qualcomm hs usb qdloader 9008 samsung who to exit qualcomm hs usb qdloader 9008 samsung](https://www.droidguides.com/wp-content/uploads/2020/06/Screenshot_2.png)
(Note to those taken the risk of doing this: All connectors shoudl be properly recconnected before assembly. between the motherboard and the back of the screen assembly.įoam film insert's cut shape and the screws nedded to accessed are shown on the picture attached.
Who to exit qualcomm hs usb qdloader 9008 samsung driver#
This Qualcomm HS-USB Driver package is for 64. The Qualcomm QDLoader Driver enables the Windows-based computer to properly detect the device when it is connected to PC in EDL Mode or Download Mode.
Who to exit qualcomm hs usb qdloader 9008 samsung drivers#
Then I inserted a piece of plastic foam film (ca 1mm thick, like the one ised for laminate flooring underlay or in the insulated plastic bags for frozen foods) under the motherboard, i.e. Qualcomm-QDLoader-HS-USB-Driver-64bit-Setup.zip file contains Qualcomm HS-USB QDLoader 9008 Drivers for Windows 10/7/8/8.1 64-Bit OS. It took me taking off the back cover and unscrewing the 6 screws (just like getting to the battery replacement/disconnect-reconnect, ex. (THE PROCEDIURE DESCRIBED HERE WILL VOID YOUR WARRANTY AND CONTAINS A RISK OF PERMANENTLY DAMAGING THE DEVICE!!!) I managed to revive my HTC One XL (evita). PS: I suspect the built quality of cover over Sensors & Front Camera (Upper part of phone) which doesn't isolate these parts from outside dust and particles! I notice dust which has penetrated beneath this cover and above front camera!! Has anyone noticed such thing? I also got same problem facing a dead HTC One!!ĭoing any trick in this forum or HTC Support did nothing, Then I tried the trick suggested by PMmibfreaky keeping phone's light sensor under sunlight while holding Power+VolumeUp for 2minutes and then connected phone to wall charger for a second, The charge light started blinking then I disconnected the charger and pushed power button to turn on the phone, and IT WORKED!!!īut sadly it did last only for 2-3 hours and after that phone went dead again and no matter what I did it never came back ON again!! Now I'm just waiting for phone's battery to be drained fully (If it really does so having a 2300mah battery!!!) and I try to connect it again to charger and see if the charge light blinks again or not, So I try to get a backup of all my ZOE movies before sending it to HTC warranty service